Trailer Hitch Installation - 2006 Toyota Sienna - Draw-Tite Video

The Curt trailer hitch part #C13105 comes with all of the install hardware needed, but the bolts are size M12-1.25x40 hex. If you need the replacement hardware you would want part #RHK. If you enter the part number on this product page we will ship…

I recommend the Kuat Piston Pro X Bike Rack for 4 Bikes #KU45VR for you. This rack is capable of carrying 4 bikes with wheel sizes from 18" to 29" diameters. The Carrier itself is one of the easiest we have to use and load your…

Good question, and it is not a necessity for your car to have a 4-way flat trailer connector in order to use the Kuat Piston Pro X bike racks. The 4-way connector that plugs in between the bike rack and the 4-way on your car (if you had one) comes…

There isn't any modification needed to wiring harness #C55580 because it fits both the 2004 and 2009 Toyota Sienna as-is. I have included a link to a video showing an example installation on a 2009 Sienna for you.

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The correct etrailer Trailer Hitch Receiver for a 2017 Toyota Sienna is part #e98837. This hitch uses M12 - 1.25 x 40 hex bolts. The torque spec for these bolts can be found in the installation instructions below. It's important to go off of…

In order to install the Curt Trailer Hitch Receiver part #C13105 on your 2013 Toyota Sienna, you will first need to lower the exhaust pipes from the rear of the vehicle. To do this, you will need a can of spray lubricant such as WD40 or PB Blaster in…

We do have the instructions available for the etrailer Trailer Hitch Receiver #e98837 that fits your 2019 Toyota Sienna. I have added a link below to the installation instructions for you, as well as attached a copy for you here. I have also added a…

If you're looking for a class III trailer hitch for your 2007 Toyota Sienna, either the etrailer #e98837 is going to offer the most ground clearance. This is especially important when considering hitch mounted accessories like bike racks, cargo…

The trailer hitches like the Draw Tite #75237 (which is a confirmed fit for your 2004 Toyota Sienna) will only fit other year models of the Sienna. Currently from 2004 to 2017 this hitch is a fit for the Toyota Siennas. I attached an install video…

Having all-wheel drive will not affect the fit or the installation of the etrailer.com Trailer Hitch Receiver #e98837 on a 2016 Toyota Sienna. The installation will be the same for all models of '16 Sienna and the same is true for similar hitches…

All of the trailer hitches for your 2006 Toyota Sienna are going to sit in the same area. You'll get slightly better ground clearance from a hitch with an 1-1/4" receiver and when the installed the Curt #C12065 and Draw-Tite #36513 Class II…