Draw-Tite Trailer Hitch # 36179 Installation Difficulty for a 1996 Ford Thunderbird
Question:
Would it be possible to email me a copy of installation instuctions so I can decide if its within MY capabilities to install? thanks
asked by: Jack M
Expert Reply:
You can certainly view the installation instructions for the Draw-Tite Trailer Hitch, # 36179. I have included a link to them for you to view. We rate the installation of this hitch as a 4 out of 10 for a novice installer. Difficulty is based on the estimated installation time and if there is any trimming or drilling required.
Installation of this hitch on a 1996 Ford Thunderbird does not require any trimming or drilling and as long as you have the correct tools and a friend to lend a hand, you can probably have it installed in about an hour.
If you plan to do some towing, the recommended ball mount is # 36063 and it should only be used in the rise position. You can use pin and clip # PC2 and ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use # C59236. I have included a link to the installation details for the wiring as well.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >