Can Hydraulic Brakes of Jayco Eagle 12LSO be Converted to Electric
Question:
I have a 2000 Eagle 12LSO with a brake actuator I drum breaks. I want to covert it to electric breaks. Is there a kit or parts you recommend?
asked by: Mike K
Expert Reply:
Since you have hydraulic drum brakes installed already on your trailer all you need is the correct electric brake assemblies and you'll be able to easily make the conversion.
To pick out the correct brake assemblies for your trailer you need to know a few things.
You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need. For example the part # AKEBRK-35-SA is a 10 inch by 2-1/4 inch thick brake assembly.
You also want to determine what the bolt pattern is of your assembly mounting flange. The standard size is 4 on 4 inch. You also want to determine the axle capacity of your trailer and go with an assembly that has the same rating, the # AKEBRK-35-SA has a 3,500 lb capacity.
I also attached a help article that covers what is needed to add brakes to a trailer for you to check out as well.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: bulk wire
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Brake Controller
- Shop: Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Shop: 7-Way Molded Trailer Wire Connector, 6' Long
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Jacketed 2 Wire (Brake Wire) - 12 Gauge - per Foot
- Search Results: break away trailer brake
- Search Results: wire
- Search Results: break away system
- Search Results: trailer wire
- Search Results: trailer brake controller
- Video: Hopkins Trailer Breakaway Kit Review
- Shop: Primary Wire - 16-Gauge - Black - per Foot
- Shop: 10 Gauge Primary Wire - Blue - per Foot
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: Difference Between Hubs # 84546UC3 and # 84546UC3-EZ
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Can Electric Brakes be Added to a 5 by 10 foot Utility Trailer
- Video: Hopkins 7 Way Molded Trailer Wire Connector Installation
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-G-EZ-K Review
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-545-35-G-EZ-K
- Video: etrailer Hub And Drum Assembly Installation
- Q&A: What Would Cause Grease to Appear All Over Trailer Wheels on 3 Trailers
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams