What is the Carrier Weights of the Curt and SportRack 4-Bike Platform Hitch Mount Bike Racks

Question

Question:

CURT Bike Rack #18087 Do you have weight for the above product?

asked by: William P

0

Expert Reply:

Yes.

The Curt 4-Bike Rack # C18086 weighs 86 pounds.

If you're looking for a lightweight 4-bike carrier check out the Swagman Trailhead 4-Bike Rack for 2" Hitches # S63381. It's a a solid rack and it only weighs about 30 pounds.

expert reply by: Charles S

0

Answer 1

The Curt platform bike rack #C18087 only can carry bikes up to 45 lb but it can fit tire widths up to 3 inches so if there's a way to take 5 lbs of the bike like by removing the battery it would work well for you.

view full answer...

Answer 2

Hello, not knowing your exact vehicle type I can not give you exact numbers. The measurements are from the center of the hitch pin hole. The Curt 4 Bike Platform Rack #C18087 will be approximately 13-15 inches to the first wheel hoop. It will have…

view full answer...

Answer 3

Curt 4 Bike Platform Rack #C18087 has adjustable ratcheting arms to secure bikes at their top frame tubes, but in cases where the bike has a step-through frame that sits too low for a good fit on the rack all you need is a simple adapter bar like…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 11

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Answer 12

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

What is the Carrier Weights of the Curt and SportRack 4-Bike Platform Hitch Mount Bike Racks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching