Installation Of The Weld On Titan Surge Brake Actuator # T2404600
Question:
just purchased a titan surge brake actuator t2404600 from you. The unit is a weld on coupler. Do I need to disassemble it to weld on to trailer.
asked by: Neals P
0
Expert Reply:
You do not need to disassemble the Titan Adjustable-Channel Brake Actuator - Painted - Drum - Weld On - 12,500 lbs # T2404600 to weld it. It is recommended to tack weld it in place and then complete the welding. You do want to remove the cap on your master brake cylinder until the unit cools down after welding.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Dexter Adjustable-Channel Brake Actuator - Painted - Drum - Weld On - 12,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Fabrication Coupler
- Weld-On
- 12500 lbs GTW
- Channel Only
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Trailer Hitch
- Shop: Westlake ST235/80R16 Radial Tire w/ 16" Liger Aluminum Wheel - 8 on 6-1/2 - LR E - Glossy Black
- Shop: Gen-Y Hitch Aluminum Loading Ramp Set - 10' Long x 15" Wide - 14,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Curt Pintle Hook with 2-5/16" Hitch Ball - Bolt On - 16,000 lbs
- Video: Curt Bolt On Pintle Hook with Hitch Ball Review
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Adjustable-Channel Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-384-00 Review
- Video: Review of Titan Brake Actuator - Surge Brake Actuator - T1890900
- Search Results: coupler lock
- Q&A: Is There A Coupler Lock Compatible With The Demco Hydraulic Brake Actuator DM72VR?
- Q&A: Replacement Trailer Coupler Recommendation for an Atwood 87558
- Q&A: Replacement Part Availability And Options For Replacing An Atwood Brake Actuator
- Q&A: Can Demco 8705001 Hydraulic Disc Brake Actuating Trailer Coupler Be Welded
- Q&A: 7,500 lbs Demco Hydraulic Brake Actuator w/ EZ-Latch Coupler
- Q&A: Replacement for Atwood 6,000 lb Hydraulic Actuating Coupler for Drum Brakes
- Q&A: Replacement Actuator/Coupler to for Trailer with Welded on Drum Brake Actuator
- Video: Demco Electric Lockout Hydraulic Brake Actuator Installation
- Search Results: atwood 85841 master cylinder replacement kit brake actuators model
- Video: Demco Hydraulic Brake Actuator Reverse Lockout Solenoid Kit Installation
- Video: Review of Titan Brake Actuator - Bolt On Brake Actuator With Manual Lockout And Cap - T63FR
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator - DEX94FR