Fit of Yakima SkyBox 16 Rooftop Cargo Box Y07335 on Rola Truck Bed Ladder Rack 59799

Question

Question:

Im planning on purchasing this for my 2017 Toyota Tacoma. I wanted to know if a Yakima SkyBox 16 Carbonite Cargo Roof Box would work with this? Also If I wanted to get a tent that attaches to the top of this will it support my weight?

asked by: Dat

0

Expert Reply:

The Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 is a confirmed fit on your 2017 Toyota Tacoma with Deck Rail cargo management system.

The mounting hardware for the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV does fit the Rola rack's crossbars. The universal T-slots on the top of the load bars also let you attach Rola channel-mounted carriers and accessories.

When you are not using the rack for the cargo box you could mount a tent so long as the tent can attach to this elliptical bar type and so long as you remain within the rack's 800-lb load capacity. This means the tent and everything/everyone in it cannot weigh more than 800-lbs.

expert reply by: Adam R

0

Answer 1

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 2

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 3

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 4

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

There is a hitch receiver that could work for your 1995 Chevy G20 van, so long as your van does NOT have a step bumper. If so, I recommend the Draw-Tite #75121 hitch, this is a 2" hitch that is a complete bolt-on installation so there will be no…

view full answer...

Answer 7

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 8

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 9

Accuracy is the most important thing when it comes to tongue weight scales in my opinion and convenience is a plus. The etrailer Tongue Weight Scale #e99044 is both. I have gotten my hands on this product and used it. One of my favorite things about…

view full answer...

Answer 10

Absolutely our Tongue Weight Scale #e99044 will work perfectly with your travel trailer! Our scale has a 2,000 lb capacity which you may think that a 5,000 lb trailer would be too much for our scale, but it's actually an ideal size trailer. What…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

We do carry a repair kit for the Dutton-Lainson DL-1602A trailer winch. You can use Winch Ratchet Repair Kit, #DL70455, as long as your winch was made after 1999. This kit will also fit DL1402A and DL1602ADD made after 1999.

view full answer...

Fit of Yakima SkyBox 16 Rooftop Cargo Box Y07335 on Rola Truck Bed Ladder Rack 59799

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching