Will Timbren Rear Suspension Enhancement System Reduce Sag On 2010 Kia Sedona

Question

Question:

I am looking at this kit because I was informed our van has fatigued rear coil springs. This is sagging the rear end about an inch. I measured the difference front to rear gap between top of tires and fender. Its less than an inch. This vehicle has never hauled anything heavy or towed and has 55k miles. Springs and shocks look fine with no visual leaks or rust. Would this kit help strengthen the factory setup and regain the small loss of height? Or is it only beneficial for towing and hauling heavy weight? Im looking at something like this versus replacing the expensive factory parts that seem prone to wear out prematurely anyway. Thank you for your input.

asked by: Zebulon L

1

Helpful Expert Reply:

The Timbren Rear Suspension Enhancement System # TDVR05096 could be just what you need for your 2010 Sedona.

These are designed to help reduce road shock and increase stability when the vehicle is carrying heavier loads. They are not designed to affect the empty ride.

You may want to have the vehicle checked out to make sure everything is in good working order because the Timbren system is designed to work with a properly working suspension system.

I have attached a link to an installation Video for this system on a Sedona you can check out.

expert reply by: Jeffrey L

1

Answer 1

In order to install the Timbren rear suspension enhancement system #TDVR05096, the first thing you will need to do is lower the rear control arm. In order to lower the rear control arm to remove the coil spring, remove the inner control arm bolt by…

view full answer...

Answer 2

According to our friends at Firestone, drilling the hole in the control arm will not weaken or otherwise damage the vehicle. The hole is absolutely necessary to provide access for the air line to connect to the bottom of the Coil Rite air spring.

view full answer...

Answer 3

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

view full answer...

Answer 4

To mount your Thule Big Mouth Roof Mounted Bike Rack (discontinued TH599XTR) into T-Slots you just need the Thule XADAPT2 Kit #Xadapt2. This gives you the T-Bolts needed to mount in the track on your crossbars, you just need to confirm that the…

view full answer...

Answer 5

You will need to find a hole in the floor of the rear cargo area of your 2005 Chrysler Town and Country so that you can route the 4-way out through the bottom. You may have to drill a hole if there is nothing there, but there should be a rubber plug…

view full answer...

Answer 6

The SumoSprings Solo Custom Helper Springs item #SS28UV would be a great option for support on your 2022 F-150. These have a 1,500 lbs capacity and fit both the 2WD and 4WD models. I really like SumoSprings over other suspension options because of…

view full answer...

Answer 7

The Timbren Rear Suspension Enhancement System #TFR1504E you referenced are more than a good option for your 2019 Ford F-150, they are a great option because they improve your truck's handling and performance overall, while also offering your…

view full answer...

Will Timbren Rear Suspension Enhancement System Reduce Sag On 2010 Kia Sedona

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching