Recommended Trailer Hitch and Wiring for 2004 Chrysler Sebring Convertible  

Question:

Expert Reply:

Based on my research, it looks like your 2004 Chrysler Sebring has a towing capacity of 1,000 pounds. I strongly recommend verifying this information by locating the towing section in your copy of the vehicle owner's manual.

If you decide to tow a small motorcycle trailer, I recommend looking at the Curt Class I Receiver Hitch # C11190. This trailer hitch is confirmed to fit your vehicle and will provide a 1-1/4 inch receiver opening. I have included the installation details for you to look through.

To activate the signal lights on the trailer, I recommend the Tekonsha Upgraded Circuit Protected Tail Light Converter Hardwire Kit # 119178KIT. This will allow you to install a 4-Way connector at the rear of your Sebring Convertible to connect with the trailer. I have attached the installation details for you to check out.

For a ball mount, I recommend the Curt class II Drawbar # C45016 . This will be compatible with either class I or class II hitches and works with the 1-1/4 inch hitch receiver on your Sebring and has a 2-5/8 inch rise or a 3-1/4 inch drop. I have also attached a link to our available selection and an article on measuring for the correct ball mount if the rise or drop on this model is not sufficient to tow your trailer level.

expert reply by: Chris R

0