TruXedo TruXport Tonneau Cover Compatibility With Utili-track System w/ Extender On Nissan Frontier

Question

Question:

I was thinking about ordering the TruXedo TruXport Roll-Up Tonneau Cover cover for my 2017 Nissan Frontier 5 ft box but Im not sure if it will work with the utili-track system and bed extender. Can you please verify? Thanks

asked by: Paul A

0

Expert Reply:

The TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX292301 is a confirmed fit for a 2017 Nissan Frontier with 5 foot bed. My contact at TruXedo confirmed that the clamps will actually sit above the Utili-Track system, so your limitations would only be if part of your system extends above the tracks where the clamps sit and those clamp locations are adjustable.

expert reply by: Jason S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Accuracy is the most important thing when it comes to tongue weight scales in my opinion and convenience is a plus. The etrailer Tongue Weight Scale #e99044 is both. I have gotten my hands on this product and used it. One of my favorite things about…

view full answer...

Answer 4

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 5

Absolutely our Tongue Weight Scale #e99044 will work perfectly with your travel trailer! Our scale has a 2,000 lb capacity which you may think that a 5,000 lb trailer would be too much for our scale, but it's actually an ideal size trailer. What…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Tom, you are on the right track. I checked out your 2023 Jayco Jay Flight 284 BHS and it does have an underslung coupler so the correct B and W Continuum weight distribution would be the part #BW88FR. An underslung coupler is basically one that…

view full answer...

Answer 8

Thanks for the pictures! No, I am sorry Richard you can not. The B&W Continuum item #BW78FR only works with frames that are 5" and 6" tall. Instead, I recommend using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control…

view full answer...

Answer 9

Pace Edwards has two confirmed fitting Switchblade covers for your 2024 Chevy Silverado 3500 DRW 8' bed; part #PE87CV, which is an aluminum and vinyl mix and part #PE77CV, which is just aluminum.

view full answer...

Answer 10

You're welcome Chris! Sounds like you've more then got the hitch covered. I can not think of a better option then the TorkLift SuperHitch Magnum Trailer Hitch item #TL74FR. You will be able to pull anything and everything with this hitch and…

view full answer...

Answer 11

This is a really good question. I sent it to our engineer and he told me that the gauge has a 3%,2%,3% margin of error. This means that in the first third of its range, it is +/- 3% of the actual tongue weight, the middle of its range it is +/- 2%,…

view full answer...

Answer 12

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...