Needed a Replacement Remote Control for the Air Lift WirelessAir System

Question

Question:

Will the 72704 remote work for the 72700 air lift? Thats the # i found on my unit?

asked by: Randy

0

Expert Reply:

I found the remote that you will need for your Air Lift system. However, the # AL72704 that you referenced is the replacement remote for the WirelessOne system and not compatible.

The replacement remote for the Air Lift WirelessAir Compressor System is # AL73002.

expert reply by: Jared P

0

Answer 1

The replacement remote part #AL72704 that you referenced takes two CR2032 batteries.

view full answer...

Answer 2

For the first generation WirelessONE the correct remote is the part #AL72704.

view full answer...

Answer 3

No. If you don't have a remote to an AirLift WirelessONE system #AL25980EZ you can control this with the WirelessONE app on your phone or you can replace the compressor or you can get the part number off the manifold of the system to determine…

view full answer...

Answer 4

Yes, for just the replacement controller for the Air Lift WirelessAIR Compressor System for Air Helper Springs #AL74000 that you referenced you would want the #AL73002.

view full answer...

Answer 5

We have the right replacement remote for you, but for the first gen wireless manifolds it is a different part than the one you mentioned; what you need is the following: - Replacement Remote for Air Lift WirelessONE Compressor System for Air Helper…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Needed a Replacement Remote Control for the Air Lift WirelessAir System

Product Page this Question was Asked From

Continue Researching