Recommended Winch Stand And Mount For 1998 Nitro Boat Trailer

Question

Question:

Looking for a winch mount or stand for a 1998 Nitro trailer. Or I need one that will work to replace it. Tracker on line help was not able to help me as the boat trailer is too old.

asked by: Noah W

0

Expert Reply:

For your 1998 Nitro Trailer, I recommend the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. You can then use the Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson # DL24110 if you want a different mounting for the winch.

expert reply by: Jason S

0

Answer 1

The inside width of the CE Smith Bow Roller Bracket #CE31005PG has an internal width of 3-11/16 inches so for a winch that is narrow enough to fit inside that we have the #DL16001 which measures 3-3/16 inches in width.

view full answer...

Answer 2

I went out in the warehouse and measured the diameter of the holes in the #DL24110 mounting bracket and the round holes measured 3/8-inch in diameter and the oblong holes measured 3/8-inch by 3/4-inch. So, the largest diameter bolt you could use…

view full answer...

Answer 3

Yes, the Fulton High-Performance Brake Winch part #F143100 will work with the Universal Hand Winch Right Angle Mounting Bracket part #DL24110. I went out to our warehouse and test fit the two products together to confirm this for you. I have attached…

view full answer...

Answer 4

I have attached a photo of the Universal Hand Winch Right Angle Mounting Bracket, part #DL24110. The center to center hole measurements for the smaller holes are 3-1/4 inches side to side, or 2-1/8 inches front to back. The bracket itself measures…

view full answer...

Answer 5

Yes, the following parts can be used together: - Dutton-Lainson Angle Mounting Plate #DL24059 - Fulton F2 Fully Enclosed Trailer Winch #FW16000101 - CE Smith Winch Stand #CE31013G - CE Smith Bow Roller Bracket for Winch Stands #CE31005PG The mounting…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Winch Stand And Mount For 1998 Nitro Boat Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching