Bed Mat Options For A 1972 Chevy C10 Long Bed

Question

Question:

Would one of these bed mats fit a 1972 Chevy C10 long bed?

asked by: Kory S

0

Expert Reply:

I do have a few universal fit bed mat options available for you however, I spoke to my contact at DeeZee and they informed me that the DeeZee Custom-Fit Truck Bed Mat part # DZ86973 is not compatible with your 1972 Chevrolet C10.

While we do not have a custom fit bed mat compatible with your truck, we do have universal fit options that may work for you. For this, you may want to consider the DeeZee Universal Utility Mat for Trucks and Trailers - 8' Long x 4' Wide # DZ85005.

I have included a list of all our universal fit bed mat options for your review.

expert reply by: Conner L

0

Answer 1

You can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but…

view full answer...

Answer 2

In my research I have found that the inside dimensions of a 1969 Chevy C-10 Fleetside are 76-1/4 inches long by 65 inches wide. The width was taken at the inside rear of the truck bed at the stake pockets so the actual bed floor will be less. My…

view full answer...

Answer 3

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

To replace your tandem torsion axles on your 1997 22 foot FLOE Enclosed 4 place snowmobile trailer, I recommend the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs #A35RS545E. These assemblies will…

view full answer...

Answer 7

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The overall measurements of the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier #LC125460 is 99-1/2 inches long overall and 23 inches wide at the mounting brackets. The length at the mounting brackets is 78 inches. Please see…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we have options available for you to attach a receiver hitch to your 2021 Keystone Raptor 5W Toy Hauler. But before ordering, I suggest you determine if your 5th wheel's frame is rated for this. I suggest contacting your salesperson or the…

view full answer...

Bed Mat Options For A 1972 Chevy C10 Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching