Tongue Weight Capacity of Curt Lunette Ring # C48560

Question

Question:

What is the vertical/ tonge weight limit on your # C48560 lunette ring?

asked by: Doug

1

Helpful Expert Reply:

The Curt Lunette Ring # C48560 has a tongue weight limit of 6,000 lbs and a total trailer weight of 60,000 lbs.

expert reply by: Jameson C

1

Answer 1

The Curt Lunette Ring - Bolt On - 3" Diameter - 22,000 lbs #C48510 is rated for 22,000 lbs weight capacity. It is not rated to stand up to 30,000 lbs so it could fail. To handle that capacity without deformation or issue, I recommend the Curt…

view full answer...

Answer 2

The Buyers Products Lunette Ring #337BDB1394 has a gross towing weight capacity of 90,000 lbs and a tongue weight capacity of 15,000 lbs. The Curt Lunette Ring #C48560 has a gross towing weight capacity of 60,000 lbs, but it is not rated for a…

view full answer...

Answer 3

Lunette rings do come in more than one size. The linked page displays both 2-1/2-inch and 3-inch inner diameter. . Lunette ring accessory items are also shown on the other linked page. Weight capacities for lunette rings are substantial, ranging from…

view full answer...

Answer 4

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...

Answer 5

There aren't any lunette rings that have a bolt pattern which measures 5" horizontally by 8" vertically so the best we can offer is a new lunette ring and mounting plate you would have to weld on. You can choose from either a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Hey Chad this is a great question. So the MORryde ALLTREK part #MR89DR does offer additional vertical suspension but it does sit a little taller than the equalizers it replaces so you wouldn't have to worry about your tires hitting fenders or…

view full answer...

Tongue Weight Capacity of Curt Lunette Ring # C48560

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching