What Is The Best Drop For Ball Mount To Gain Prop Protector Clearance?
Question:
I have a 2016 Yukon XL. The top of the receiver is 23 1/2 from the ground. Im towing a 2001 Malibu with a SMP trailer. The clearance of the prop protector with a 7 3/4 ball mount is 5 3/8 and the ball clearance is ~14. When I the tongue by 2 inches to simulate a 10inch . The clearance of the prop protector is 6 1/4 and the ball clearance s to 12. My problem is the prop protector drags when I come into my drive way. What would be the best, a 10inch or a 12inch ball mount? 10 : 6 1/4 prop protector clearance, 12 ball clearance 12 : 7 1/8 prop protector clearance, 10 ball clearance
asked by: Mike L
Helpful Expert Reply:
If I understand you correctly, it sound like you have a couple of things going. On level ground you want to tow as level as possible, but you don't want to bang up your trailer going in and out of your driveway. I recommend you go with an adjustable ball mount like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K # 325-GH-516 or the 15" Drop - 10K # 325-GH-317. This comes with the adjustability to adjust the hitch ball down to give you the driveway clearance you need and the ability to re-adjust and tow level once you have cleared the driveway.
I've attached a ball mount measurement article to further help so you can determine angles needed and correct height for clearances needed.
Products Referenced in This Question
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 15" Drop - 10K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 15 Inch
- Rise - 15 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Stacked Receivers
- Gen-Y Hitch
more information >
Product Page this Question was Asked From
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 12 Inch
- Rise - 12 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Stacked Receivers
- Gen-Y Hitch
more information >
Continue Researching
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K
- Shop: InfiniteRule Locks for Gen-Y 10K and 16K Ball Mounts for 2" and 2-1/2" Hitches - Qty 2
- Shop: Replacement Drill Attachment for Trailer Valet XL, V2, or MV PRO Trailer Dolly
- Shop: Trimax Stainless Steel Combination Padlock with 3/8" Shielded Shackle
- Shop: Trimax Thex Super Chain - 5' Long
- Q&A: How To Set Lock Code On Trimax Resettable Combination Padlock with Shielded Shackle
- Video: Trimax Thex Super Chain Review
- Video: Review of Trimax Locks Cable Locks - 5 Foot Long Thex Super Chain - TMX76ZR
- Video: Trimax Shielded Shackle Resettable Combination Padlock Review
- Video: Review of Trimax Locks Padlocks - Resettable Combination Padlock With Shielded Shackle - TMX68ZR
- Video: Gen-Y Stacked Receivers Adjustable 2-Ball Mount Review 325-GH-214
- Video: Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable 2 Ball Mount - 325-GH-317
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 15" Drop - 10K
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Q&A: Adjustable Ball Mount With 12 Inch Rise for 2 Inch Trailer Hitch Receiver
- Q&A: Ball Mount Option that Has 11 inches Drop
- Shop: Windshield Wiper Blades
- Q&A: Gen-Y Adjustable 2-Ball Mount w/Stacked Receiver And Hitch Mounted Bike Rack
- Q&A: Recommended Trailer Wheels for 4 Wheel Army Trailer With 17.5 x 6-3/4 Inch Wheels
- Q&A: Availability of Ball Mount with More Drop Than 12-1/2
- Q&A: How Do I know How Much Drop Is Needed When Getting A Ball Mount?
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of BulletProof Hitches Trailer Hitch Ball Mount - Adjustable Ball Mount - HD2512
- Search Results: tongue
- Search Results: ball mount
- Search Results: bw hitches
- Search Results: e98887
- Search Results: x track