30-Amp RV Electrical Components for Jayco Jay Flight Model 19RD Travel Trailer

Question

Question:

I have a Jayco, Jay Flight, Model 19RD, Travel Trailer. Looking for a wet location ie outside, electrical 2 plug receptacle, cover plate

asked by: Robert

0

Expert Reply:

You can see our range of electrical cable hatches on the linked page. These include round units in many diameters as well as rectangular parts like # A10-2150BKVP from Valterra.

If you need the actual connectors for the trailer's 30-amp electrical service you can review the other link that shows all electrical inlets, cables and adapters.

expert reply by: Adam R

0

Answer 1

I see where you're coming from in regards to how aggressive (or lack thereof) the GFCI Outlet Cover #37205-12215 closes. To put your mind at ease I recommend going all out and using the Valterra Locking Electrical Cable Hatch #A10-2150BKVP…

view full answer...

Answer 2

The Furrion Marine Power Cord Adapter #FP5515SY will unfortunately not work with the Furrion Replacement RV Power Inlet #F30ITSSS, however I do have another option. Instead, I recommend using the Mighty Cord RV Power Cord Adapter #A10-1530DBK. This…

view full answer...

Answer 3

We have one smaller locking hatch than the Valterra City Water Inlet and Lockable Hatch #A01-2004VP which fits rough opening cutouts of 5-7/8" wide x 4-3/4" high. It is the Valterra Universal Inlet and Lockable Hatch #A01-2002VP. It…

view full answer...

Answer 4

The Mighty Cord Replacement RV Power Inlet - Twist Lock - 30 Amp - White #A10-30INVP has a removable cover to protect the wire connections so I've measured the depth of the outlet with the cover on and off (pictured below).

view full answer...

Answer 5

Thanks for the picture! The Replacement Converter Section item #PD4045CSV is the correct part you need to replace your PD4045KA converter. It is compatible with Lithium batteries you'll just have to flip the LI/LA switch. I linked the…

view full answer...

Answer 6

WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…

view full answer...

Answer 7

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 8

Your Progressive Dynamics Panel part #PD4060K can be switched to Lithium mode pretty easily. If you check out the picture I attached you can see the circled selector that allows you to go between modes. You would want to have it moved to the LI…

view full answer...

Answer 9

The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA is actually the same unit as the PD4045KV. The KV is just an alternate part number for the same unit so this is the one that you want for a replacement.

view full answer...

Answer 10

I've attached the installation instructions for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR for you below.

view full answer...

Answer 11

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 12

I do have a simple wiring diagram for the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 45 Amps #PD9245C. Basically you just need to run the power wire from the converter directly to the DC distribution panel and…

view full answer...

30-Amp RV Electrical Components for Jayco Jay Flight Model 19RD Travel Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching