How to Determine if Valterra Flexible Waste Valve Cable Kit # TC372 Will Fit an RV

Question

Question:

I need help identifying my black water waste valve. It looks like your TC372 sort of. I have a picture I would like to send of the one in my trailer to confirm.

asked by: Glen G

0

Expert Reply:

Most likely the Valterra Flexible Cable Kit # TC372 you referenced will be what you need. This is a 3 inch diameter waste valve which is a very common size. The way this installs is very universal as well. The cable is 72 inches as well.

Feel free to send me the picture of yours though as well as the diameter of the valve and I'll verify that it's the correct kit.

expert reply by: Jameson C

0

Answer 1

For the Valterra #TC372 the bolt pattern is 3-3/4", and the overall length, minus the protrusion, is 13-7/8". For the Valterra #TC172 the bolt pattern is 2-1/2", and the overall length, minus the protrusion, is 9-1/4". I have…

view full answer...

Answer 2

The standard Valterra replacement valves like the part #T1003PBC are designed to attach to a remote handle that's further away while the Valterra Bladex like part #T1003VP the handle is right at the valve instead. Both valves are interchangeable…

view full answer...

Answer 3

There actually isn't any way for us to know what length of cable you need when replacing the black water valve on your 2018 Montana Legacy 3130RE so you would need to either take some measurements or make an educated guess. The good news is there…

view full answer...

Answer 4

We do have a 3 inch waste valve for a black water tank that allows you to use a cable; the Valterra valve we offer has a drilled stem that allows you to attach your cable. What you are looking for is the following: - Valterra Bladex Waste Valve Body…

view full answer...

Answer 5

The Valterra Bladex Waste Valve for RV Black Water Tank #T50 that you referenced has a handle that is attached to a tube, and the Valterra Cable with Valve Handle #TC72PB uses a cable for the extension so they are not compatible. To add an extension…

view full answer...

Answer 6

Looking at the picture you provided it's either the Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub Item #D50-2880 or Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 3" Spigot…

view full answer...

Answer 7

The plan you have sounds logical, I contacted the manufacturer to inquire about any additional information they may have that would assist in addressing the issue with your LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank,…

view full answer...

Answer 8

We have two different sets of 3 inch waste valve seals. We have the part #T1003-7VP which is for the new style Valterra valves and the part #T1003-9VP which fits the older style

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

How to Determine if Valterra Flexible Waste Valve Cable Kit # TC372 Will Fit an RV

Product Page this Question was Asked From

Continue Researching