Recommended Trailer Brakes With Parking Brake For 10 Inch 5-On-5 Bolt Pattern Drums
Question:
Morning, Im going to be building a trailer here shortly, Ill be grabbing a set of the timbren axeless axles off you 2000lb, 4lift, long spindle is there an electric brake set up with a park brake I can use with these? As well ill need a 5 on 5 bolt pattern drum i camt seem to find on your site Thanks
asked by: Brad J
Helpful Expert Reply:
For your custom trailer build, I recommend using the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs # ASR2KHDS04 or the # ASR2KHDS03 for wide tires. Either of these options will work perfectly with the Dexter Electric Trailer Brake Assembly with Parking Brake - 10" - Left Hand - 3,500 lbs # K23-086-00 and Right Hand # K23-087-00. The parking brake capability will also require the Titan Breakaway and Parking Kit for Drum Brakes # T2385200.
For your hub and drum assemblies, I recommend the Trailer Hub and Drum Assembly - 3,500-lb Axles - 5 on 5 - E-Z Lube # 84556UC3-EZ which are confirmed to fit these brake assemblies and the Timbren 2,000 lb system.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Dexter Electric Trailer Brake Assembly w/ Parking Brake - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly w/ Parking Brake - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Breakaway and Parking Kit for Drum Brakes
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- Breakaway Kit
- Parking Brake
- Dexter
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Pintle-Hitches
- Article: Trailer Tire Sizing
- Q&A: Maximum Compression of Timbren Axle-Less Suspension System # A20RS545 Under Load
- Q&A: Bolt Hole Spacing on the Timbren Heavy-Duty Axle-Less Trailer Suspension ASR2KHDS02
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Overview of Lubricating Grease
- Q&A: Comparing Timbren Axle-Less 2K Trailer Suspension Systems with 4" Lift
- Q&A: Would Timbren Axle Less System for Wide Tires Allow for Wider Tires, How Much Clearance is Provided
- Article: Trailer Wiring Diagrams
- Article: How to Raise Your Travel Trailer Height
- Q&A: Replacement Dutton Lainson B2500 Winch Recommendation
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3