Replacement Hub For A 1994 Rockwood 2040 Pop-Up Camper
Question:
Looking for a replacement hub for 1994 Rockwood 2040 pop up camper, its stamped AL-KO 7120 on the back side, 4 studs on 4inch bolt circle
asked by: Jim T
Expert Reply:
I called AL-KO and they informed me that there were two different hub assemblies for a 1994 Rockwood 2040 Pop-Up Camper. In order to choose the right hub you will have to do one of two things. You can either measure where the inner and outer bearing ride on the spindle using a digital caliper such as part # PTW80157 or you could remove the old bearings and note the part number stamped inside.
For a inner and outer diameter of 1.063" or part # L44649, you will need the Trailer Idler Hub Assembly part # AKIHUB-440-2-2K. For an inner and outer diameter of 1" or part # L44643, you will need the Trailer Idler Hub Assembly part # AKIHUB-440-2-1K.
I have attached a video that will show you how to properly measure the spindle diameters.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range C and Load Range D Tires
- Q&A: Availability Of Hub Assembly For Karavan Trailer That Uses Inner and Outer Bearing L44649
- Q&A: Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
- Article: How to Measure a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 2023 Best Gifts for RVers & Campers