Recommended Trailer Hitch for 2013 Honda CR-V
Question:
I am looking for a trailer hitch for my 2013 Honda CR V. The specs say the capacity is 1,500 and tongue weight is 10. Is there a trailer hitch out there that would work for me? I am looking to tow a small boat, but all the hitches I have found are 200lbs or more. Looking for recommendations. Thanks.
asked by: Andrew M
Expert Reply:
Going with a trailer hitch that has a higher towing and tongue weight capacity than your 2013 Honda CR-V is not going to affect the vehicle's ability to tow a boat trailer like what you are wanting to do. A Class III trailer hitch like the Draw-Tite # 75742, which is what I recommend for your vehicle, has itself a towing capacity of 4,500 pounds and a tongue weight capacity of 675 pounds. You do not need to find a trailer hitch that matches up with the towing capacities of the vehicle.
The reason I recommend going with a Class III trailer hitch, even though you still will not be able to exceed the CR-V's 1,500 pound towing capacity, is because of the 2 inch receiver that it provides. A 2 inch receiver, as opposed to a 1-1/4 inch receiver that lower capacity hitches have, will allow for many more hitch mounted accessory options like bike racks and cargo carriers if you ever decide to use one. A stronger hitch than what is needed is also not going to cause any harm, but will help to provide a sturdier unit on your vehicle when towing a trailer.
I have attached an installation video for this trailer hitch on your 2013 Honda CR-V for you to check out.
For wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118561. This will install a 4-way connector needed to power your trailer's signal lights and will simply plug into existing wiring behind the driver and passenger side tail lights on your vehicle.
Then for a ball mount, I recommend looking at the Curt Class III Ball Mount with 2 Inch Ball # C45036 with a 2 inch drop. I have also included an article on choosing the best ball mount for your setup if this one does not work. I have also attached a couple articles on towing a trailer that you may find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Best Bike Racks for Electric Bikes
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: How To Carry E-Bikes and Flat-Tow a Vehicle on the Back of an RV
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Troubleshooting Pulsing Brakes With The Demco Stay-In-Play Braking System While Turn Signal Is On
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Article: How to Choose a High-Low Adapter
- Q&A: Recommended Hitch for a 2013 Honda CR-V
- Q&A: What Does GTW and TW Mean and What is Weight Distribution, 2008 BMW X5