Ball Mount Needed With at Least 8 inch Drop, 1-1/4 inch Ball Hole Diameter, and is 3/4 inches Thick
Question:
Do you have a ball mount that fits a 2inch receiver, 2inch , with a 1-1/4inch ball hole and 3/4inch thick towing platform with a length not shorter than 8? thanks
asked by: David C
Expert Reply:
Yes! The Curt Ball Mount # C45338, which has a 7 inch Rise and a 8-1/4 inch Drop, has a ball hole diameter of 1-1/4 inches and the ball hole platform is 3/4 inches thick. You will want to secure this to your trailer hitch receiver with a pin and clip # C21500.
You can use either a hitch ball that has a 2 inch diameter # A-90 or a 2-5/16 inch diameter # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 7" Rise, 8-1/4" Drop - 9-3/8" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Suspension Enhancement Recommendation for 2019 Toyota RAV4
- Q&A: My Tow Bar is More That 3" Out Of Level - Could This Cause The Arms To Not Lock>
- Q&A: Replacement Surge Brake Actuator For Trailer W/ Older Swing Away Actuator For Disc Brakes
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Q&A: Should Westlake 215/75R17.5 Trailer Tire Be Inflated to Max PSI
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Replacement for Model 70LP Surge Brake Actuator
- Article: Steel vs. Aluminum Ball Mounts
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Does a Trailer have to be towed Level or Can it be Off Up or Down
- Article: Brake Controller Installation: Starting from Scratch