Recommended Spare Tire Cover For 225/75/R15 Tire

Question

Question:

What size tire cover would you recommend for a 225/75/R15 tire. I believe this converts to about a 28.3inch tire. Tires are spares mounted on side of trailer in vertical orientation. Want best quality cover you have that will handle road speeds.

asked by: Zack M

0

Expert Reply:

For the 225/75/R15 spare tires, I recommend the Rampage Spare Tire Cover for Jeep - 27" to 29" - Black # RA772901 This cover is a UV resistant 19 ounce vinyl fabric made of the same material as Jeep soft tops. It has an adjustable cord in rear seam for snug fit and will be durable to protect your tire from weather, dirt, and grime even at highway speeds.

expert reply by: Jason S

0

Answer 1

What tire size do you have?

view full answer...

Answer 2

The Bonded 4 Wire - per foot #16-4B-1 you asked from would use the brown running light wire for your clearance/marker lights. The LED light you referenced sound like they have two wires so one will be power and the other ground. You can connect them…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 7

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Recommended Spare Tire Cover For 225/75/R15 Tire

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching