Lippert SolidSteps to Fit a 30 Inch Doorway

Question

Question:

Do you have the Solidstep for a 30inch doorway? If so, how much? Thanks

asked by: Michael B

0

Expert Reply:

We sure do. How many steps are you looking for? For a 30 inch wide door use part # LC791575 for a quad step if your threshold height is between 35 and 44 inches, part # LC791573 for a triple step if the threshold is between 27 and 36 inches, or part # LC733932 for the double step if the threshold is only 22 to 28 inches.

A friend of mine just bought a set of these for his tow hauler and absolutely loves them.

expert reply by: Charles S

0

Answer 1

The manufacturer for the SolidStep Manual Fold-Down Steps for 29" to 36" Wide RV Door Frames - Double - Aluminum Item #LC733932 says the lowest setting for the legs is 3-4" so you should be able to be at that 20" entry height and…

view full answer...

Answer 2

The widest point of the Lippert #LC733932 Solid Step is 24 inches, which is the dimension from the outside of one stringer to the outside of the other. The latching mechanism that holds the steps folded upright into their storage position is width…

view full answer...

Answer 3

You can always use a smaller width step if you have to, so the #LC791574 would still work. A lot of times people have things in the way like a cabinet door or fire extinguisher that prevents them from folding the steps back up into the RV so they end…

view full answer...

Answer 4

The Lippert SolidStep Fold-Down Steps like the 2-Step #LC733931 you were looking at are designed to fit specific doorway widths. Unfortunately trailer manufacturers don't make dimensions like this available so you will need to take a quick…

view full answer...

Answer 5

The TorkLift GlowStep Revolution Scissor Steps #TLA8004 that you referenced are designed to fit entry heights on RVs that are between 32-1/2 and 44 inches which which might be a little higher than what you have on your 2018 Lance 1475 based on the…

view full answer...

Answer 6

There is a slight difference between the #LC3726892 and #LC3726891. The #LC3726892 comes with a control switch setup that allows the light and step to come on and off with the opening and closing of the door.

view full answer...

Answer 7

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

view full answer...

Answer 8

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The SolidStep Manual Fold-Down Steps part #LC791572 will fit a door way from 25" -28.9" wide when measuring the frame inside. If the factory label sticker shows a doorway width between 26"-29" then the above steps will work for…

view full answer...

Answer 11

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Answer 12

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Lippert SolidSteps to Fit a 30 Inch Doorway

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching