Can Camco RV Power Defender Circuit Analyzer Dogbone Be Used with Connector Adapters

Question

Question:

Will the serge protector work with a adapter say a 15 or 30 amp

asked by: Mike

0

Expert Reply:

Yes, the Camco RV Power Defender Circuit Analyzer Dogbone # CAM55313 that you referenced can work with various socket adapters like what you mentioned.

expert reply by: Jameson C

0

Answer 1

50-amp service and 30-amp service use different connectors. The 50-amp surge protector #CAM55313 uses 4-prong connectors while the 30-amp surge protector #CAM55301 uses 3-prong connectors. So you will need to have one for each type of campground…

view full answer...

Answer 2

I checked with my tech contact over at Camco and they assured me that there wouldn't be an issue when using the Camco RV Power Defender Circuit Analyzer Dogbone - 125V - 50 Amp #CAM55313 on a 220v breaker as long as it is designed for 50amp…

view full answer...

Answer 3

In order to plug a 50 amp camper into a 30 amp hookup at a campsite you will indeed need an adapter, for which the Mighty Cord #A10-3050FHVP will work perfectly. With this particular setup you would still want to use a 50 amp surge protector like…

view full answer...

Answer 4

In regards to the Camco RV Power Defender Circuit Analyzer Dogbone part #CAM55313, the internal circuit board will shut down the flow of power if it senses a spike or other dangerous condition, and won't allow the power to flow again until the…

view full answer...

Answer 5

The Camco RV Power Defender Voltage Protector #CAM55301 that you referenced automatically disconnects when it senses that the voltage levels are at a dangerous point. Since it automatically reconnects when the voltage levels stabilize (between 102V -…

view full answer...

Answer 6

The idea behind the #CAM55313 RV Power Defender is that you'd plug it into the power source and let it analyze the incoming power to ensure it's safe before plugging your RV into it. The unit doesn't use a breaker or a fuse, it's…

view full answer...

Answer 7

The Camco RV Power Defender Circuit Analyzer part #CAM55313 and Camco RV Power Defender Voltage Protector part #CAM55306 are similar in that they both work to protect the trailer from power surges and have diagnostic lights to help with…

view full answer...

Answer 8

The difference between the Camco RV Power Defender 30 amp, part #CAM55312 and the Camco RV Power Defender 50 amp, part #CAM55313 is the amperage that they work on. The 50 amp variant is built for higher power drawing RVs, while the 30 amp is designed…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 12

Thanks for reaching out, Jeff! While I'm not familiar with adding an OEM-style brake controller to a Ford pickup, since your 2019 F-150 didn't initially come with the factory tow package my instinct is to have you check fuse 24 for your brake…

view full answer...