Wiring Harness Compatible with 2017 Mazda CX-5 That has LED Lights
Question:
Just to confirm that this will work on the 2017 CX-5 that has all LED lights?
asked by: Hubert C
Expert Reply:
Yes, the wiring harness # C59496 will work with the LED lights on your 2017 Mazda CX-5.
If you don't already have a trailer hitch receiver I suggest the Draw-Tite # 76138. It's a 2 inch, Class III hitch receiver which will give you more capacity and variety when it comes to towing or carrying accessories on the hitch.
To tow a trailer you'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.
For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.
I've also included links to some articles on towing that you might find helpful.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class IV
- B and W
more information >
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Blue Ox
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch and Wiring Harness for 2024 Honda Odyssey EX-L
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Recommended Wiring Harness for a 2024 Honda Pilot
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Recommended Hitch for a 2023 Toyota Highlander w/ the Full Size 20" Spare Tire
- Article: Most Popular Wheel Bearings
- Q&A: What Does E6 Furrion Thermostat Indicate
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?