Can Nose of 1988 Bee Horse Trailer be Lowered to Allow Trailer to Tow Level
Question:
We purchased a 1988 Bee 3 horse goose neck trailer. We then bought 2003 Ford F-350 dually tp pull it. We have found that with 6inch of clearance between truck and trailer, it sits unlovely. 4inch makes it sit better. We currently have 4 225/75-r15 load E on it. If the fenders will clear could we go with a 16 inch tire with load f to raise it some and give us more weight capacity. The gvwr is 12,000. We are in the process of updating the living quarters that will add more weight to that.
asked by: Gayla R
Expert Reply:
Thanks for the picture. Yeah you are very nose high and need to get the trailer sitting level. It's hard to tell in the picture but is the gooseneck coupler adjustable? You should see some set screws on the side of the tube that would allow you to raise the tube in the trailer and allow the nose to come down on the trailer. You aren't going to be able to fit a large enough tire to offset the height difference.
The coupler of the trailer needs to adjust or you should replace it with one that does. The part # SAC2516-I is adjustable and would be a great option.
Product Page this Question was Asked From
Round Gooseneck Coupler with 28" - 38" Adjustable Height - 24,000 lbs
- Gooseneck Coupler
- Coupler with Outer and Inner Tube
- Round Tube
- 24000 lbs GTW
- 2-5/16 Inch Gooseneck Ball
- Manual Latch
- Redline
more information >
Continue Researching
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Round - 2-5/16" Ball - 30K
- Q&A: Replacement Round Gooseneck Coupler With Inner & Outer Tube
- Search Results: electric brake magnet clip
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Round - 2-5/16" Ball - 25K
- Search Results: brake magnet clip
- Search Results: trailer bearings races seals caps
- Search Results: brake magnets
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Replacement Magnet Clips for Electric Brake Assemblies (Qty 4)
- Video: Trailer Hub Inspection Demonstration
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Round Gooseneck Coupler with 28" - 38" Adjustable Height - 24,000 lbs
- Search Results: trailer brakes
- Search Results: bulldog gooseneck coupler
- Shop: Shocker Hitch Air Cushioned Gooseneck Coupler - 4" Round Tube - 30K - etrailer Fit
- Shop: Bulldog Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 20,000 lbs
- Q&A: Trailer Bearing and Seal Replacement for 7,000 lb Axle
- Video: etrailer Gooseneck Trailer Coupler - Coupler with Outer and Inner Tube - GCPN-30008 Review
- Video: Dexter Axle Trailer Brakes BRKH122510 Review
- Video: etrailer.com Ram Gooseneck Coupler Review
- Video: Unitized Oil Seal Review
- Video: Review of Redline Replacement Magnet Clips Electric Brake Assemblies - BP19005
- Q&A: What is Minimum Clearance Between Gooseneck Trailer Overhang and Truck Bed Rails
- Q&A: Can 17.5 Inch Tires and Wheels be Used in Place of 16 Inch on a Gooseneck Trailer
- Q&A: Recommended Adapter With Offset For Gooseneck Car Hauler Trailer
- Q&A: Installation of Redline Round Gooseneck Coupler SAC2516-I
- Search Results: gooseneck coupler inner tube
- Q&A: Can Just Inner Tube Of Gooseneck Coupler On 2004 Featherlite 8541 Be Replaced?