What PSI Should Kenda Tire AM10062 be Inflated to
Question:
tire part am10062 Hi, although I have tried to find the correct pressure for the tire on the tire itself, it is no where to be found. Can you advise the correct tire pressure? Thanks in advance.
asked by: Joe S
1
Helpful Expert Reply:
I checked your order notes and it looks like you bought the tire part # AM10062 which has a 90 psi capacity. With trailer tires you always have to run them at their max pressure so that you ensure you get the full capacity which also prevents the tire from flexing too much and causing excess heat build up.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Kenda K353 Bias Trailer Tire - 4.80-12 - Load Range C
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Recommended 4.80 x 12 Trailer Tires for Highway Driving
- Q&A: Availability of a Size 4.80-12 Tire with a Speed Rating Higher than 65 MPH
- Q&A: Should I Use Radial or Bias Trailer Tires On My Jet Ski Trailer?
- Q&A: Best Trailer Tire Recommendation for a 12 Inch Rim
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Best Way To Carry a Rooftop Tent On a 2024 Kia Sportage?
- Article: Steel vs. Aluminum Ball Mounts
- Article: Measuring a Trailer Tire
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure for Trailer Hitch Drop