Replacing Trailer Leaf Spring Hangers
Question:
Fixing my trailer, bought your kits ap233 and h248. would like to make sure my measurements are correct if I could. currently front hanger to center hanger hole to hole is 29 1/4. center to back is the same. equalizer is 5 1/2inch end to end holes, but the equalizer is straight not triangle line the new one. Spring to spring holes are 27. Attached is a picture of what I have now, just need to make sure I have the welder put the new hangers in the correct spots. Thanks
asked by: Hushton E
Expert Reply:
Thank you for including your diagram, but unfortunately some of the information is not legible.
In any case if you are replacing existing parts with different ones you will want to mock up the suspension set-up by first just tack welding the hangers. This will enable you to see if the whole system fits together and if you need to select a new equalizer. The linked diagram provides general axle placement guidelines for new construction.
Generally, you want the eye of your spring to be about 1/2-inch away from the hole in the equalizer; the shackle strap will join the two.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Continue Researching
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Search Results: lippert brakes
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 9K to 10K
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Shop: Replacement Shoe and Lining Kit for 12" Manual-Adjust Brake Assembly - 5,200 lbs to 7,000 lbs
- Search Results: wire connector
- Search Results: butt connectors
- Article: Trailer Wiring Diagrams
- Video: Review of Dexter Axle Trailer Brakes - 12 inch Electric Drum Brake Kit - 23-105-106
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Shop: Hopkins Trailer Wiring Installation Kit
- Shop: Deka Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 1
- Video: Dexter Left and Right Electric Trailer Brake Kit Installation
- Video: Dexter Electric Trailer Brake Assembly Installation 23-105
- Video: etrailer Trailer Brakes AKBRKR-S-12 Review
- Video: etrailer Electric Trailer Brake Kit Installation
- Q&A: Wiring Brakes On Tandem Axle Trailer
- Q&A: Parts Needed For Wiring Electric Trailer Brakes On a 2018 Tandem Axle Trailer
- Search Results: leaf spring hanger
- Q&A: How to Tell if a Trailer Has Nev-R-Adjust Brake Assemblies
- Q&A: Trailer Brakes are Very Weak Even After Adjusting Them
- Q&A: Can a 7k Rated Leaf Spring be Used on a 6k Rated Trailer Axle
- Q&A: Recommended Trailer Suspension Options for 5th Wheel Trailers
- Q&A: Installing Lippert Bolt-On Shock Mount Kit on Forest River Toy Hauler with Axle Above Leaf Springs
- Shop: Trailer Hitch
- Search Results: trailer brakes
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Leaf Spring Suspension
