Which Axle of Tandem Axle Trailer Should have Brakes If Only One Axle Will Have Them
Question:
I have A 2axe trailer rated at 14000 lbs . Im installing 12 inch brakes electric will never carry more than 10000 lbs. would I better installing on the front axel or the rear.
asked by: Keith M
Helpful Expert Reply:
If you are going to install brake assemblies on only one axle of a tandem axle trailer you want to install them on the axle that will see the most weight relative to the other. Typically it's the front axle due to trailers being longer in front of the axles than behind them and inertia does push the weight forward. But for most boat trailers it's the rear axle since the engine is at the rear of a boat and it's the heaviest part of the boat.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Trailer Brake Assembly for B12EA-22 on 2018 Forest River 294BH Travel Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks