Options for Carrying 3 Kayaks with the Yakima Rack and Roll Trailers

Question

Question:

Is the 66inch trailer able to carry 3 kayaks using Thule J-bar racks? Can it accept a square bar without an adapter?

asked by: Doug

0

Expert Reply:

If you wanted to carry 3 kayaks on the 66 inch wide Yakima Rack and Roll you are going to need the Thule Stacker part # TH830 which carries them on their side which allows the three to fit. Otherwise the J-style racks would end up being too wide most likely and would require the wider Rack and Roll # Y08107. This would fit three kayaks easily with racks like the # TH834 that is a J style rack.

expert reply by: Jameson C

0

Answer 1

There is no problem with storing the Yakima Rack and Roll Trailer - 78" #Y08107 outside as it is made out of aluminum so it is corrosion resistant. A cover is not required, and at this time Yakima does not make a cover for the trailer. If…

view full answer...

Answer 2

The Yakima Rack and Roll Trailer #Y08107 referenced in your question can be easily folded for storage in numerous positions, however the wheels themselves cannot fold flat. The wheels though can be easily removed along with folding the trailer to…

view full answer...

Answer 3

The frame width of the 66 version of the Rack and roll is 54 inches wide and the frame width of the 78 is 66 inches wide. The overall width of each of the Yakima Rack and Roll Trailers are the exact same width as the length of the crossbars on the…

view full answer...

Answer 4

The best cargo box for your needs will depend on how much cargo space you are in need of and how much room you have for the box on your Rack and Roll part #Y08106. You didn't mention the widths of your kayaks so I really don't have a…

view full answer...

Answer 5

I was unable to find an order number for you, so if you need a new Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer #Y08121 you can purchase a new one here, or if you can contact Yakima for their warranty, which does have a lifetime…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

I checked with the manufacturer, Curt, for you and can verify that yes, the Curt hitch does fit your 2022 Subaru Ascent Onyx Edition: - Curt Trailer Hitch Receiver #C25VR This will give your Ascent a nice option for a hitch that can be concealed, and…

view full answer...

Answer 10

The best hitch receiver for hauling a bike with your 2022 Subaru Ascent is going to be the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item #C25VR. This hitch receiver mounts behind your rear bumper bar instead of below your…

view full answer...

Answer 11

The connector you are looking for to install the Curt trailer wiring kit part #C56040 on your 2019 Subaru Ascent is located behind the driver side rear panel in the cargo area. If you check out the picture I attached you'll see where to find it.

view full answer...