Does Westin Hardware Kit 21-2356PK Come with Brackets and Hardware

Question

Question:

On the Westin hardware kit No. 21-2356PK, does it include the mounting brackets also? Three of my original brackets have been damaged. Thanks.

asked by: Kenneth R

0

Expert Reply:

If you check out the picture I attached that shows everything that comes with the Replacement Hardware kit part # 21-2356PK you will see that it does include the brackets.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement Hardware #21-240PK will only fit Westin PRO TRAXX Oval Nerf Bars #21-24015 and #21-24010. Unfortunately, these nerf bars are not designed to fit any 2018 Chevy Silverado 1500 models (including Z71). With that being said, there may be…

view full answer...

Answer 2

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Hey Rick, thanks for reaching out! The 10K GTW rating of the Fastway e2 Weight Distribution #FA94-00-1000 is the max trailer weight the system can handle. With that being said, when you choose a WDH you need make your selection based off the loaded…

view full answer...

Answer 6

The Husky Center Line Weight Distribution with Sway Control 32217 is for 600 lb to 800 lb total tongue weight capacities (the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

According to the owner's manual for your 2011 Nissan Armada, if the gross trailer weight (GTW) of your trailer is more than 5,000 lbs then the use of weight distribution is recommended. In addition to the weight distribution system, I also…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Using spring bars that are overrated for the total tongue weight of your trailer can cause a pretty rough ride but other wise would not actually harm anything. If you notice the rough ride then replacing your spring bars with one that are rated for…

view full answer...

Answer 12

Hey Kristopher, great question. You have a 2022 Ram 1500 correct? If so, I definitely recommend going with the Air Lift LoadLifter 5000 Air Helper Springs #AL57375. I can confidently say that using these will take care of all of the sagging, and will…

view full answer...

Does Westin Hardware Kit 21-2356PK Come with Brackets and Hardware

Product Page this Question was Asked From

Continue Researching