Comparing The Curt # 56146KIT With The Curt # 59236 For 2017 Hyundai Santa Fe Sport

Question

Question:

I have a 2017 Hyundai Santa Fe Sport. What is the difference between these two wire harnesses? 56146KIT and C59236

asked by: Kevin W

0

Expert Reply:

The major difference between the discontinued 56146KIT and the # C59236 is the maximum amperage and the construction of the converter. The # C59236 is resists water and vibration due to potted enclosure. Both will work on your 2017 Hyundai Santa Fe Sport, but the # C59236 is a slightly heavier duty unit.

expert reply by: Jason S

0

Answer 1

I have a solution for you, but after doing a little research, I found that the tongue weight capacity of the base and sport models of the RAV4 is approximately 150 lbs and the tongue weight capacity of the limited model is approximately 350 lbs. I…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes! We have both a hitch and wiring for your 2024 Toyota Grand Highlander. Hitch - Curt Trailer Hitch Receiver #C26VV Wiring - #C59236 If you are planning to do any towing, you can add the etrailer Ball Mount Kit #989900 to round out a tow package.

view full answer...

Answer 6

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 7

Yes the Curt hitch part #C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part #C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight…

view full answer...

Answer 8

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 9

That's a good question, and there is one option I do like better for your 2021 Ford Mustang Mach-E between the Curt #C77ER and Draw-Tite #DT72GR hitches, and that's the hitch from Curt, which is the following part number: - Curt…

view full answer...

Answer 10

The red wire of the #C59236 would need to run to the stoplight circuit of your vehicle if it has separate turn and brake lights. Or if they are combined on the same circuit it would just get grounded. You may need a circuit tester like the part…

view full answer...

Answer 11

This sounds like the problem could be a short or possibly ground related but based on what you have said a ground is much less likely. Look for any pinched or frayed wires on the trailer and fix as needed. This could cause a short resulting in…

view full answer...

Comparing The Curt # 56146KIT With The Curt # 59236 For 2017 Hyundai Santa Fe Sport

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching