Dimensions Of Titan Zinc-Plated Straight Tongue Trailer Coupler # T4853100
Question:
Looking at your list of questions and answers for the Titan T4853100, it is immediately apparent that the coupler pictured in the very first answer by Michael H. has a different bolt pattern than the coupler pictured in the other answers or on the main listing. Which bolt pattern is correct? Additionally: 1 What is the actual internal width of the coupler channel, the part that fits over the trailer tongue? 2 How thick is the steel from which the channel is fabricated? I am guessing it is 1/8inch or 3/16. Thank you.
asked by: Eric P
Expert Reply:
The bolt pattern showing two slightly higher holes 3 inches on center and two slightly lower and larger holes 5 inches on center from each other is the proper bolt pattern.
The part that actually fits over the trailer tongue has an internal width of 3 inches. It is fabricated from 3/16 inch steel and is zinc coated giving it about a 1/4 inch thickness. I've attached a video where you can see these measurements.
Product Page this Question was Asked From
Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 21000 lbs GTW
- 3 Inch Channel
- Trigger Latch
- Dexter
more information >
Continue Researching
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Q&A: Measurements of Titan Zinc-Plated Straight-Tongue Coupler
- Search Results: 2 516 trailer coupler
- Shop: Demco Actuator Replacement Master Cylinder for Drum Brakes
- Shop: Replacement Master Cylinder for Demco Actuators - Disc Brakes
- Search Results: demco actuator
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Grease Seals 10-36 (pair)
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Search Results: 44649
- Shop: Trailer Wiring
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Article: Trailer Tire Sizing
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Brake Controller
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Brake Controller Installation: Starting from Scratch