bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2017 Ford Focus  

Question:

Can I take base plate off a 2013 Ford Focus and install it on a 2017 Ford Focus

0

Expert Reply:

There was a generation change between a 2013 Focus and a 2017 Focus so you would not be able to take a base plate off of a 2013 and install it on a 2017.

For the 2017 Focus you would want the part # BX2663 which is a confirmed fit.

For a tow bar the best and most popular option for that base plate kit is the # BX7380.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot, # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>