Will The Brake Assemblies For A 7 Bolt Flange Work With The 4 Bolt Flange?
Question:
Hi. Will these work on a 9,000 lb 4 bolt axle??
asked by: Nlporter
Expert Reply:
For a 9,000 lb axle with 4 bolts, you will want the Dexter Electric Brake Assembly, RH 12-1/4" x 3-3/8", # 23-435 and the matching left side assembly # 23-434. These are the only assemblies for the 4 bolt mounting plate and the 7 bolt plates are not compatible.
Unfortunately, the Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 10,000 lbs, # AKEBRK-10L, is an example of the 7 bolt flange that is not compatible with your axle.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" - Left Hand - 8K
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" - Right Hand - 8K
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 10,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 10000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long
- Shop: Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles - 30" Long
- Q&A: Will Dexter 9K - 10K Hub and Drum Fit Lippert 10K Axle
- Shop: Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Shop: Dexter Single-Axle Trailer Hanger Kit for 3" Slipper Springs - 6-1/4" Front
- Video: Review of Dexter Trailer Leaf Spring Suspension - Hangers - Suspension Kits - HAP-105-00
- Q&A: What Size Drive-In Studs are Used on Hub #8-430-5UC3
- Q&A: When is Wheel Retainer Ring Needed for Dexter Hubs and Wheels
- Q&A: Electric Drum Brake and Hub/Drum for 10K Axle
- Q&A: Recommended Slipper Spring Suspension for 10,000 Pound Trailer
- Q&A: Distance to Set Hangers of Slipper Spring Hanger Kit with Slipper Spring e67SR
- Q&A: Comparing Dexter and etrailer Brand Electric Trailer Brakes for 10K Axles
- Search Results: 8000 lb dexter axle
- Search Results: 10k leaf spring
- Search Results: 30~68~1
- Search Results: e5226 spring
- Search Results: 28~9~1
- Shop: Provider 215/75R17.5 Radial Trailer Tire - Load Range H
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Front Hanger for 2" Wide Slipper Springs - 5" Tall - 9/16" Bolt Hole
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-430-5UC3 Review
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-450-451 Review
- Search Results: dexstar
- Search Results: hap~103~00
- Video: SuperSprings SumoSprings Trailer Helper Springs Review