Recommend Correct Hitch For 2005 Ford Five Hundred Sedan
Question:
is this the correct receiver for a 2005 ford five hundred sedan this is not a taurus wagon-?
asked by: Dan B
Expert Reply:
The item you selected, Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4, part # 36360, is the correct receiver for 2005 Ford Five Hundred Sedan and will fit great. The Ford Five Hundred and Ford Freestyle share the same chassis.
To complete your towing setup with part # 36360, you may be interested in the following items:
Class II Drawbar, part # 36071
1-7/8 Inch Hitch Ball, part # 19256
2 Inch Hitch Ball, part # 19258
T-One Vehicle Wiring Harness, part # 118395
Pin and Clip, part # PC2
Part # 36360 is a Class II, 1-1/4 Inch Hitch, we do have a Class III 2 Inch Hitch which I would recommend as it has a greater tongue weight and towing weight capacity. A 2 Inch Hitch is also more compatible with accessories such as hitch mounted bike racks.
For a 2 Inch Class III Hitch, I would recommend Draw-Tite Trailer Hitch, part # 75299.
To complete your towing setup with part # 75299, you may be interested in the following items:
Ball Mount, part # 2753
1-7/8 Inch Hitch Ball, part # 19256
2 Inch Hitch Ball, part # 19258
2-5/16 Hitch Ball, part # 19287
T-One Vehicle Wiring Harness, part # 118395
Pin and Clip, part # PC3
I have linked instructions for the Draw-Tite Trailer Hitch Receiver, part # 36360, and part # 75299. Also linked is a video installation of another hitch on a 2006 Ford Freestyle, which would be a good reference when installing hitch on your 2005 Ford Five Hundred.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >