Adapter Needed to Convert 4-Pole Trailer Connector to 7-Way for 1997 Chevy Tahoe
Question:
97 tahoe with 4 pin flat plug. my trailor has a 7 pin male plug. do you have an adapter?
asked by: C
Expert Reply:
We offer an adapter that will convert your existing 4-pole to a 7-way. Part # 37185 also features a 4-pole for smaller trailers.
If your trailer has brakes and you want them to actuate, you will also need a brake controller installed on your Tahoe.
I would recommend a proportional controller, like the Tekonsha Prodigy 2 part # 90885. A proportional controller is preferable to the older time-delayed controllers, because the proportional controller can sense how quickly and with how much intensity the vehicle brakes are being applied. A proportional controller will send the proper voltage to the trailer brakes so that the trailer brakes at the same rate as the tow vehicle, saving wear and tear on both braking systems as well as improved braking.
If you are needing to install a controller, I would recommend our Brake Controller Install Kit, part # ETBC7. This kit includes the adapter mentioned above, plus all wire, circuit breakers and hardware to complete the installation.
We have a Brake Controller Install Guide that you might find helpful, as well as a FAQ page that features additional information about brake controllers. Click on the provided links.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Pollak 7 Pole to 4 Way Connector Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Blade
- Plug Only
- 4 Flat
- Pollak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Which Curt Trailer Hitch is a Fit for 34 inch Wide Trailer Frame
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Replacement 12-1/4 Inch x 3-3/8 Inch Braking Assembly with Four Bolt Brake Mounting Flange
- Q&A: What is Diameter of Lock Core Side of B and W Coupler Lock part # BW23FR
- Q&A: How to Use B&W Tow & Stow 2-Ball Mount with GM MultiPro Tailgate
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Overall Width and Diameter of a 235/80R16 Size Tire
- Q&A: What is the Capacity of the B&W Trailer Hitch Receiver Lock for 3 Inch Hitches
- Article: Ball Mount Basics: Weight Capacity, Class, and Size