Need A 7-Way to 7-Way Cable To Fit Between My RV and 2015 Jeep Wrangler Unlimited While Flat Towing

Question:

I bought a used Roadmaster tow bar to tow my Jeep. The Jeep has the Invisi Brake system installed. I need the cable that connects the Invisi Brake on the Jeep to the motor home. Both the Jeep and motor home have connectors on them. The inside has a round receptacle with flat connections. There are 6 flat connections and 1 round in the middle. They are the same on both vehicles. Do you have a cable for this application?

asked by: Joe V

Helpful Expert Reply:

Sounds like you need a 7-way to 7-way wiring cable to connect your 2015 Jeep Wrangler Unlimited to your RV when flat towing. You will need a 7-way plug and lead wire and a 7-way connector end.

I recommend the WesBarg 7-Way, RV Style Connector # WG54006-043 and a Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector # PK12706. You will have to wire the Pollak connector on the other end of the WesBerg cable to connect your RV and Jeep. I like the coil design of this cable because it takes up the slack in the cable between the RV and tow vehicle better than a straight length of cable.

The WesBarg cable # WG54006-043 measures 6 feet long. If this cable is too short for your hook up, WesBarg, # WG54006-046, has a coiled cable that measures 12 feet.

I have linked an article that will help you in wiring the 7-way plug to the cable.