How Tall is Better Bath 24 x 36 RV Bath Tub

Question

Question:

How tall is the tub? And is 24inch by 36inch the total width and length or the size of the opening you sit in?

asked by: Bob M

0

Expert Reply:

RV tub # LC209653 is 24 inches wide and 40-1/4 inches long overall and 36 inches long x 19 inches wide on the interior so it is small. RV tubs are generally smaller than tubs in a house since space is so limited.

expert reply by: Michael H

0

Answer 1

Pretty much every residential tub has a flat front like what you're talking about, but when we step over to the RV world things get a little different. The design of the Better Bath RV Bathtub #LC209653 where it has that lip instead of a…

view full answer...

Answer 2

To install the Better Bath RV Bathtub - Left Hand Drain #LC209653 you were looking at you will only need mounting hardware which you can find at your local hardware store, and a new drain if you wish to replace your current drain. You will not need…

view full answer...

Answer 3

While we do have a selection of rounded bathtubs, none of them are circle if that is what you are looking for. Our smallest tub is the Better Bath RV Bathtub 36-1/8" Long x 24" Wide #LC209369. You can get it in color parchment or in white…

view full answer...

Answer 4

From the back of the Betterbath RV Shower Pan #LC209653 to the center of the drain measures 5-1/2 inches.

view full answer...

Answer 5

The Better Bath 24" x 36" RV Bath Tub #LC209653 can install in a house if needed just like any other tub. The dimension of it just happen to be smaller like what RVs typically need. We do not have wall panels though at this time.

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...