Recommended Snow Plow for 2004 Dodge Ram

Question

Question:

Looking for a plow for a 2004 Dodge Ram, what do you offer?

asked by: John

0

Expert Reply:

One of the most popular snow plows we carry is the Detail K2 Rampage II # K2RAMP8219. It measures 82 inches wide and 19 inches tall and can be used at 5 different angles. It's also electric and includes an in-cab switch and wireless remote to control it.

To install the Rampage II onto your 2004 Dodge Ram you will need the mounting brackets. If your truck is a Ram 1500 you'll need part # K284311, and you'll need part # K284312 if it's a 2500 or 3500.

expert reply by: Charles S

0

Answer 1

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

I checked with Curt and I can confirm that the Curt Front Mount Trailer Hitch item #C22NR does fit the 2022 Chevrolet Silverado 1500 LT with the diesel engine. The only picture we have is from the installation instructions and I have attached it…

view full answer...

Answer 4

The Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part #C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.

view full answer...

Answer 5

Thanks for the pictures but no, the EX2700 tonneau cover that the #EX1700 fits is for a 2004-15 Nissan Titan 6' 7" Bed. The one previously mentioned #EX1770 is for your truck, so it'd for sure work if you have the 2770 tonneau cover.

view full answer...

Answer 6

In regards to HappiJac Truck-Mounted Camper Tie-Downs like part #LC182908-182928, the front tie-down installs inside the bed on the front panel directly behind the cab. The rear tie-down then mounts to the bumper. They will not require removal of the…

view full answer...

Answer 7

Good question! The blade stiffeners that come with the Detail K2 Snowplow #K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you…

view full answer...

Answer 8

I attached a picture that shows the install instructions for the Caster Kit for SnowBear Snowplows #SB324-126 that you referenced.

view full answer...

Answer 9

To use a SnowBear plow with your 2021 GMC Sierra 1500 you'll need to install a front mount hitch like part #C31088 (does not fit a 2.7L Turbo) and then use one of their hitch-mount snow plows like the Personal Snowplow #SB324-080 which is…

view full answer...

Answer 10

Apart from the size of the plows, another economic factor is whether the plow is electric actuator driven like the Detail K2 Rampage II Elite Snowplow - Custom Mount #K2RAMP8219ELT or electric winch driven like the Detail K2 Rampage II Snowplow…

view full answer...

Answer 11

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR will fit your 2022 Ram 3500. This has a bolt-on installation with a 9,000 lb line pull and 500 lb vertical load limit. The only exception is if you have a diesel model.

view full answer...

Answer 12

To attach a SnowBear plow to a front hitch like the Curt #C31089 that fits your 2019 Ram 2500 what you need is the hitch adapter part #SB324-120. This will enable your current plow to attach to a hitch so you'd be set with it and the front…

view full answer...

Recommended Snow Plow for 2004 Dodge Ram

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching