Replacement Motor And Fan Blades For Ventline Bathroom Fan On 1995 Double Wide Manufactured Home

Question

Question:

Hello i have a 1995 double wide manufactured home. It has 1 phillips ventline v2062 fans in each of the 2 restrooms. 1 fan works but makes noise like its not working correctly and the other doesnt move at all, just hums so i know they both need replaced. What do i need to replace the motor and fan blade. If you can let me know the correct part numbers and if you stock those items, thanks

asked by: Jaime I

0

Expert Reply:

The replacement motors you need for your Ventline V2062 bathroom fans is part # BCD0314-00. I called my contact at Ventline and they verified this will be the correct replacement.

For the replacmeent fan blades you will need part # BVA0312-00.

expert reply by: Jeffrey L

0

Answer 1

Yes, the Phillips V2062 and the Ventline V2062 are the same so for a replacement motor you'd need #BCD0314-00. For the replacement fan blades you will need part #BVA0312-00.

view full answer...

Answer 2

I believe I have a solution for you. It sounds like you need the Replacement Fan Motor for Ventline Range Hoods #BVD0278-00. This is a 2 speed fan motor designed to fit Ventline Range Hoods which is what it sounds like you have. This is pretty…

view full answer...

Answer 3

The motor you sent in a picture of is very similar to the #BCD0314-00 but it is slightly different than the part #BCD0314-00 when comparing the two. It appears as this motor will work just fine as a replacement though. Basically either wire can be…

view full answer...

Answer 4

There is not a specific kit that comes with the motor, blade, and ceiling vent cover for your exhaust fan V2062 so you will want to get those separately. You can go with Replacement 110-Volt AC Fan Motor #BCD0314-00 and Replacement Fan Blade for…

view full answer...

Answer 5

You will likely need access to the top of the vent to replace the motor on your Ventline roof vent. This means you will have to carefully get to the roof of the trailer for access. After that it is just a matter of taking out the pieces in the way,…

view full answer...

Answer 6

It sounds like the #BCD0314-00 will work for you. The shaft's diameter is 3/16 inches and the entire length from tip of the shaft to the end where the mounting screws go through is 3-1/2 inches. Also the shaft itself is 1-3/8 inches long.

view full answer...

Answer 7

Thank you for the photos of your bathroom vent fan and the tub/shower faucet! They were both very helpful in finding correct replacement parts for you. I passed the photos of the bathroom vent fan on to my contact at Ventline, and he was able to…

view full answer...

Answer 8

The Ventline V2044 Bathroom Ceiling Vent can use the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan w/100 CFM Capacity #BCD0314-00 or the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00. We have confirmed with…

view full answer...

Answer 9

The replacement motor you need for a Ventline roof vent V2062 is the part #BCD0314-00 and for the fan blade part #BVA0312-00.

view full answer...

Answer 10

The correct replacement motor for your fan is the 110-Volt AC Fan Motor #BCD0314-00 which is 100 CFM capacity.

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Replacement Motor And Fan Blades For Ventline Bathroom Fan On 1995 Double Wide Manufactured Home

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching