Bolt Won't Thread in to Install a Trailer Hitch
Question:
I have installed this product and unfortunately I am unable to thread the 3rd bolt on the left furthest from the bumper. I have read several reviews of folks having the same issue. Do you have any recommendations? I am currently only using the hitch for a bike rack so I left it as is but am curious if towing something with only 5 bolts would be an issue. Please advise. Thanks!
asked by: Amanda S
Helpful Expert Reply:
You definitely want all of the hardware installed for hitch # C13272 or any hitch because how it attaches is part of how it gets its rating. It sounds like the problem you are having is a factory weld nut that is packed with grime and corrosion. Giving it a good, thorough cleaning with a wire brush and some PB Blaster will help.
You will apply a good amount of the spray into the weld nut in question and let it soak for a good 15 minutes. Then go at it with a wire brush. Repeat as often as needed until you can thread the bolt in. For a brush you can use # 814092.
I have also included a help article and video on cleaning weld nuts for you.
Products Referenced in This Question
- Accessories and Parts
- Fifth Wheel Installation Kit
- Gooseneck Installation Kit
- Trailer Hitch
- Tools
- Tube Brush
- 1/2 Inch
- Flint Hill Goods
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: threaded hitch pin
- Search Results: nylon brush 814092
- Search Results: wire brush
- Search Results: yakima
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Replacement Hardware for Yakima Doubledown Hitch Mounted Bike Rack
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Search Results: hitch
- Video: Cleaning Weld Nuts for Trailer Hitch Installation
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Multi Fit - Class III - 2"
- Shop: Brake Controller
- Video: Softride Hitch Locks - Universal Anti-Rattle Lock - SR25219 Review
- Search Results: help
- Q&A: Bolt Hole Spacing of Curt C13900 Multi Fit Class III Hitch
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2024 Volkswagen Atlas
- Q&A: How Difficult Is the EcoHitch Hidden Trailer Hitch Receiver To Install On a 2011 Toyota Prius
- Q&A: Some of Bolt & Hole Was Stripped Installing Curt Hitch C11419
- Q&A: I Am Having Trouble Getting The Last Bolt To Fit When Installing My Hitch
- Shop: Vehicle Seat Covers
- Video: etrailer Bucket Seat Cover Installation - 2020 Ford F-250 Super Duty
- Video: Review of Ultimate Jack Trailer Jack - A-Frame Jack - 322-RDJ-2K
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2021 Volkswagen Atlas Cross Sport
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: 4-Way Trailer Hitch Wiring For 2024 Volkswagen Atlas