Recommended Trailer Wiring Harness For 2017 Honda Accord Coupe
Question:
Im looking for wiring harness for a 2017 Honda Accord Coupe. I like the kit # C56173, but have concerns if this will fit the coupe and also work with LED taillights. Please advise.
asked by: Nicole S
Expert Reply:
The trailer wiring harness you asked about, part # C56173, is designed to fit the Honda Sedan only and is not a fit for your Coupe. I do have a harness that will work for you.
I recommend the Vehicle Wiring Harness # C59236. The installation of this kit does require hard-wiring.
It sounds like you plan to do some light towing. I recommend the Curt Trailer Hitch, part # C11496. This is a Class l trailer hitch and it has a 1-1/4-inch receiver opening.
For a ball mount to use in the hitch I recommend part # 3593. This ball mount has a 2-1/8 inch rise or 2-3/4 inch drop. The hitch pin and clip are included with the hitch. The hitch balls I recommend are part # 19258 for a 2-inch ball and part # 19256 for a 1-7/8 inch ball.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Availability Of Trailer Wiring Harness For A 2024 Toyota Grand Highlander
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: What Does the Curt Hitch Look Like When Installed on a 2024 Toyota Grand Highlander?
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Does Curt Hitch C12130 Fit 2008 Mercury Grand Marquis