Metal Used in the Bulldog Winch Booster Cable Set BDW20233

Question

Question:

Are these Copper or Copper clad aluminum? Thanks

asked by: Paul J

0

Expert Reply:

I spoke with my contact at Bull Dog Winch and he informed me that the # BDW20233 uses copper clad aluminum wiring and cast brass clamps.

expert reply by: Jameson C

0

Answer 1

Yes, you can wire your winch with clamps to the truck battery. 2 gauge wire should be sufficient for a 5,000 lb. winch. If you wanted to be sure, you can look in the owners manual to verify the wire gauge needed for your particular winch. You can use…

view full answer...

Answer 2

We do have a number of options for heavy-duty booster cables, and you can make the choice about what you need based on the length you need, as well as if you want the 1-gauge wire or 2-gauge wire. Your options are: - 1-Gauge Wire, 30 Feet Long:…

view full answer...

Answer 3

The Trailer Valet JXS Trailer Jack #TV64FR is going to be the closest option we have to what you are wanting. This jack does have a pipe type mount but you must use the included mounting bracket pipe mount since the pipe is different from a…

view full answer...

Answer 4

The Superwinch LT2000 Electric Utility Winch, #1120210, does come with a bar mounted remote. You can see it in the pictures on the product page. Click on them to make them larger. I have included a link to the installation details for this winch for…

view full answer...

Answer 5

The Power Inverter 1000 Watts with Three AC Receptacles part #WC3720 comes with 6 gauge wire leads which are designed to be attached directly to a battery. If you wish to extend these leads you can do so but you'd need to use a larger gauge, the…

view full answer...

Answer 6

I attached a help article that details exactly what is required for wiring up a winch, but for your setup you would want to go with a wiring kit like part #BDW20043. This will run wires up directly to the battery. LED lights draw a very small amount,…

view full answer...

Answer 7

You can use the Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 3 Gauge - 16' Long #BDW20043 to provide the connection from the battery to the rear of your 2018 Ram ProMaster 1500, which will give you a plug and play solution for…

view full answer...

Answer 8

If you are wanting to put a larger deep cell battery in your trailer to power your winch and recharge it from the battery on the 2008 Dodge Ram 2500 you will need to wire it directly with the Wiring Kit, #BDW20043, depending on what size winch you…

view full answer...

Answer 9

We hav winches like the part #2953AT which can be mounted to a trailer like you need. The trailer wiring of your vehicleis not rated for use with the Master Lock Electric Trailer Winch #2953AT though. The wiring could overheat and cause damage to the…

view full answer...

Answer 10

If you are a frequent user of a medium to heavy duty winch then yes it is a good idea to carry a separate battery with you. Many times we see the auxiliary battery mounted within the engine compartment if there is space available when you have the…

view full answer...

Answer 11

There are a few things you will need to consider when determining which kit to purchase. The size of the winch and the length of cable you will need are two factors that you will need to now before purchasing. We carry both Bulldog and Superwinch…

view full answer...

Answer 12

We have winch wiring kits like the part #BDW20207 that have 2 AWG wire run to a quick disconnect type of connector. Using this thicker gauge wire will only be beneficial to run power to your trailer. Another option is the 3 AWG #BDW20043. One end…

view full answer...

Metal Used in the Bulldog Winch Booster Cable Set BDW20233

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching