What are the Dimensions for the Valterra Metal Recessed Water Inlet Flange for RVs

Question

Question:

Need dimensions of product.

asked by: John

1

Helpful Expert Reply:

I have attached some pictures with dimensions for the Valterra Water Inlet for RVs # A01-0176LFVP. The connection on the back is a 1-3/4 inch by 1/2 inch female pipe thread inside brass connection. A 1-3/4 inch plastic pipe extension is also included. The white metal flange has a quality powder coat paint over it and includes 3/4 inch long metal installation screws (Quantity #3). Installation putty tape and pipe thread tape for making your connections on the threaded portions are included as well. Please check out the linked video for additional information.

expert reply by: Edward F

1

click to enlarge

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The main difference between the Dometic 310 Part-Timer RV Toilet #DOM57FR and the Dometic 311 Part-Timer RV Toilet #DOM67FR is that the 310 is standard height (20" tall) and the 311 is a low profile (15-1/2" tall). Both toilets will mount…

view full answer...

Answer 3

The biggest difference between the Dometic 310 part 302310093 you've currently got and the Dometic Part-Timer #DOM57FR is that the Part-Timer comes with an all wood, slow-close seat where your existing model is the retail model that comes with…

view full answer...

Answer 4

The distance from the back of the toilet to the center of the bolt holes that secure the Dometic Part-Timer RV Toilet #DOM37FR is 14-3/4 inches. The center of the bolts is inline with the center of the toilet like what you see in the dimensional…

view full answer...

Answer 5

That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…

view full answer...

Answer 6

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 7

To select the correct B&W Continuum Weight Distribution System for your needs you will first need to determine if you have a standard coupler(mounts on top of trailer frame rails) or an underslung coupler(mounts on the bottom of the trailer frame…

view full answer...

Answer 8

ince the Jensen VR187 is a 1.8 DIN stereo system you will have to make alterations to the cutout hole to fit any replacement. I recommend upgrading to the Jensen RV Stereo #JWM45. This Double-DIN stereo plays audio from radio signals, CDs, DVDs, and…

view full answer...

What are the Dimensions for the Valterra Metal Recessed Water Inlet Flange for RVs

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching