Recommended Trailer Hitch For 2012 Toyota Sienna To Tow Boat
Question:
Hello I have a 2006 Toyota sienna and I am looking to add a hitch to it. I will be hauling a 1994 bayliner capri 2050 with it. The boat is 20 feet long on a single axle trailer with surge brakes. The boat weighs 2600lbs. Should I get a class 2 or a class 3 hitch. I was worried about the class 3 hanging down lower and dragging on certain angles. I just want to make sure I get the right thing to haul my boat so I have no issues. thanks
asked by: Rob M
Expert Reply:
The trailer hitch I recommend for your 2006 Sienna is the Curt, part # C13105. This is a Class lll hitch and it has a 2-inch receiver opening. I recommend a Class lll hitch because it is much easier to find accessories that will work with a 2-inch receiver than a 1-1/4 inch when given the option.
Since you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
If you do not have a trailer connector on your Sienna I recommend the Tekonsha T-One Vehicle Wiring Harness, part # 118304. This harness is a simple plug-in installation. You just plug the harness into the connection points behind the Sienna tail lights.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing Curt and etrailer Hitch for 2023 Toyota Sienna
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Dimensions of C-Channel for Enclosed Trailer # 362213-955
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Tongue Weight Rating of 2016 Toyota Sienna When Using the Draw-Tite Max-Frame # 76112 Trailer Hitch
- Q&A: Recommended Trailer Hitch Receiver For 2013 Toyota Sienna SE
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Article: Rust Prevention
- Article: Best Bike Racks for Electric Bikes
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch