Replacement 4-Way Recommendation for Trailer that Has 7 Wires Ran to 4-Way
Question:
i have a boat trailer that has 7 wires going into a 4 pin harness. 1 pin broke and i cant find another that has 7 wires coming out how could i take the 7 and rewire into a 4 wire
asked by: Trevor
Expert Reply:
That's an unusual 4-way setup you have but we have a solution that will work.
I think your best option for a 4-way would be to get a 20 ft. Wishbone 4-Way Trailer Wiring Harness # A20WB. This is a male side 4-way with a 20 feet section of wire that could easily be cut down if needed. This is also a wishbone setup that has 2 wires run for the running light circuit.
You would need to run all of the white wires to the one white wire of this 4-way and you would be good to go.
Products Referenced in This Question
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 11 - 20 Feet Long
- Plug and Lead
- 4 Flat
- Optronics
more information >
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Caliper Bolts for AL-KO/Hayes Disc Brake Caliper BP18-050
- Q&A: Replacement Oil Seal for AL-KO 568303
- Q&A: Does The Progressive Dynamics PD4655V Have A Lithium Jumper
- Q&A: Which Instructions Are Used Installing a Roadmaster Brake-Lite Relay in a Ford F-150 w/ Neutral Tow
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Trailer Tire Sizing
- Article: Flat Towing Package for 2014-2015 Chevrolet Equinox