Hub and Grease Seal Recommendation to Replace DICO Hub 45264
Question:
I have an 2000 Integrity boat trailed with an DICO 45264 Hub. Everything on hub AKIHUB-545-35-G-EZ-K specs line up with what I have. Except the Grease Seal measurements. My Grease seal has the numbers TCM 171255TC and says on the package there are 1 11/16inch Seals Fits 1 3/8 Bearings... However the specs for the hub AKIHUB-545-35-G-EZ-K say Grease seal included: 58846 Inner diameter: 1.719 Outer diameter: 2.565 Those diameter dont match the ones that I know fit my existing hubs. Any idea if this hub will work for me? Thanks,
asked by: Steve H
Expert Reply:
What you would want to do is swap in the grease seal part # 168255TB when you install the trailer hub part # AKIHUB-545-35-G-EZ-K if everything else matches up. This seal has an inner diameter of 1.687 inches like you said you need so it would match right up.
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub for DICO 45264
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: 7 pin trailer wiring harness
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Trailer Spindle Nut 1"
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: D Washer for EZ Lube Spindles
- Search Results: l68149
- Search Results: l44649
- Search Results: 2 inch spindle
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Shop: Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Search Results: 25580
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings
- Shop: Fifth Wheel Hitch
on Trailer Hubs and Drums
