Adapter Recommendation for Connecting to Bayonet Fittings of Valterra Waste Valve T50

Question

Question:

I get some leakage down the waste water drain pipe even though I had all of the waste valves refurbished. Until my RV shop corrects the problem I need a controllable temporary containment method. I purchased the T50 waste valve to use on the combined output pipe from the waste water tanks. The input side of the T50 valve does not interface with the output pipe from the tanks. What do you recommend?

asked by: William H

0

Expert Reply:

Sounds like you're possibly in need of an adapter to connect to the bayonet fittings of the # T50.

The part # CAM39471 is an adapter that can swivel and has 4 different styles of fittings it can connect to. I attached a review video for this adapter for you to check out as well. Since you didn't tell me what kind of fitting you have I can't specifically say if this comes with something compatible.

Or maybe you are looking for a 3 inch diameter PVC pipe to go from the waste tank to the T50 fitting. If that is the case we do not offer that.

expert reply by: Jameson C

0

Answer 1

Yes the operator replacement part #MA10-20281K-1AF that you referenced will work as a replacement for your Maxxfan #4951ks.

view full answer...

Answer 2

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 3

The waste valve you came from, part #T58 is not a valve that uses glue because it is designed to attach to the RV side and the waste tube with the bayonet adapters on each side of the valve. We do have waste valves that do require gluing. I have…

view full answer...

Answer 4

I have included a diagram that shows the location of some screws that attach the screen frame and the upper housing (fan shroud) to the flange. That may allow you to access the area you are needing to look at. The Ventline Northern Breeze is a…

view full answer...

Answer 5

Hi Nicole, The only way to remove a fitting with ABS cement used on it would be to cut it off from the pipe. If there's nothing wrong with the flange then I recommend just removing the gasket that's still sticking out from it and removing the…

view full answer...

Answer 6

The closest option we currently have that has an elongated bowl would be the Dometic 320 Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic #DOM87FR or #DOM27FR for Tan. These toilets have a seat height of approximately…

view full answer...

Answer 7

I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just need to make…

view full answer...

Answer 8

The Valterra RV Sewer Hose Carrier #A04-5094BK that you referenced does not have pre-drilled holes for the sewer hose to air out, but you certainly can drill some if that is what you are needing. As you can see from the product photos and attached…

view full answer...

Answer 9

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Adapter Recommendation for Connecting to Bayonet Fittings of Valterra Waste Valve T50

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching