Trailer Hitch and Wiring Recommendations for a 2016 Jeep Cherokee Altitude
Question:
The install video makes it look easy. My friend tried to install the 13172 on his 2016 Cherokee, and he says the 16 rear end is a bit different and he doesnt think it fits. I also have a 16 Cherokee and wish to install the hitch. Have you had any issues installing this on the 2016 Cherokee?
asked by: Mike S
Expert Reply:
Curt trailer hitch # C13172 is indeed a fit for the 2016 Jeep Cherokee Latitude, Latitude Altitude, Limited, and Sport models. Installations always look easy in videos and when the vehicle is on a lift! It is a little more difficult on the ground.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And if you need to add a trailer connector you can use # 118605 to add a 4-Way flat to the back of the vehicle. I have also linked a video showing an example installation of the wiring for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Replacement Brake Assemblies and Hub/Drums for 15k Dexter Axle
- Article: Trailer Wiring Diagrams
- Q&A: Hitch Extension for Towing a Boat on a Truck with an In-Bed Truck Camper
- Q&A: Can I Use Both the 7-Way and 4-Way Connectors at the Same Time on a 2015 Chevrolet Silverado
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: No Turn or Brake Signals on Trailer on a Jeep Liberty with Tow Ready Harness 118524
- Article: Trailer Tire Sizing
- Q&A: Weight of 21K Demco Hijacker AutoSlide 5th Wheel Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacement Automotive Lighting
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule