Will the Yakima SUP and Surfboard Pad part # Y04071 Fit Aero Bars that are 3-1/2 by 1 inch

Question

Question:

My aero racks are 3 1/2inch wide and about 1inch thick, will your SUP Aero racks fit my crossbar? Thanks

asked by: Ken W

0

Expert Reply:

Yes, the dimensions you listed are ones that are compatible with the Yakima Crossbar Pads, part # Y07413.

expert reply by: Jameson C

0

Answer 1

Rectangular crossbars that are 2" wide and 1" tall aren't too large for most surfboard pads. Check if they're compatible with aero shaped bars, and they are likely to be compatible with your bars. You can get the Malone Rack Pads…

view full answer...

Answer 2

We do not carry a part that adapts Rhino-Rack Nautic Stack Kayak Carrier part #RRS520 to fit the Yakima round bars. It fits the Yakima Whispbar (aero) and the Yakima Heavy Duty bars (square) but not the round. I recommend the Thule Stacker part…

view full answer...

Answer 3

The weight capacity of the Rhino-Rack Vortex Aero Crossbar System is indeed 165 lbs evenly distributed across both bars. The weight of the Rhino-Rack Nautic Stack Kayak Carrier part #RRS520 would then need subtracted leaving you with 160 lbs for up…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Will the Yakima SUP and Surfboard Pad part # Y04071 Fit Aero Bars that are 3-1/2 by 1 inch

Product Page this Question was Asked From

Continue Researching